Rockwell rebuilding?

mudslayer

Member
Joined
Aug 31, 2013
Messages
361
Anybody know of a shop that rebuilds Rockwell center sections? We use Rockwell rearends mated to 100hp electric motors on our mixers at work to drive the agitators. We have 2 that need rebuilt and everything were finding is out of state.
 

CHOP SHOP

Active Member
Joined
Sep 13, 2007
Messages
11,492
Location
pierce county
Anybody know of a shop that rebuilds Rockwell center sections? We use Rockwell rearends mated to 100hp electric motors on our mixers at work to drive the agitators. We have 2 that need rebuilt and everything were finding is out of state.
I can refurb or furnish you with replacements.

Whats wrong with the ones you have?


The last pair I built went to Top Truck Challenge with 500hp. :D
 

CHOP SHOP

Active Member
Joined
Sep 13, 2007
Messages
11,492
Location
pierce county
Gotcha. I only have parts and build top loaders.

The diffs you have are much more common. If good used ones are acceptable then I would look at medium duty rigs like Internationals for a replacement diff.

Otherwise I would contact Pacific Powershifts. They should take care of you. In the Tacoma/Fredrickson area.

http://powershifts.com/
 

mudslayer

Member
Joined
Aug 31, 2013
Messages
361
Gotcha. I only have parts and build top loaders.

The diffs you have are much more common. If good used ones are acceptable then I would look at medium duty rigs like Internationals for a replacement diff.

Otherwise I would contact Pacific Powershifts. They should take care of you. In the Tacoma/Fredrickson area.

http://powershifts.com/
:awesomework: thanks!
 

Latest posts

Top